Tank Slap - Motorcycle Forum

currently looking for any daytona 600,650 bodywork-damaged is fine.
after any fairings,huggers,mudguards.

if you have any please let me know.
many thanks tim.
troylance1@hotmail.com

Are you in the UK, or us Troy.?

I've got a truck load. Probably every panel in various stages of demise!

https://flic.kr/p/nwM9Tr

This is what I've got left

Monty wrote:https://flic.kr/p/nwM9Tr

This is what I've got left

Those must be worth a few quid. You could almost make a full bike set!

C00kiemonster wrote:You could almost make a full bike set!

Between me and Spudda we could probably do a full bike!

LOL I don't need to feel so bad about my hoard of 675 parts then.?

9x side panels
5x tailpods
4x Front Nose Fairings
7x wheels
2x swingarms
11x clipons
7x levers
6x rearsets
8x engine side casings
etc etc etc.........

StMarks wrote:LOL I don't need to feel so bad about my hoard of 675 parts then.?

9x side panels
5x tailpods
4x Front Nose Fairings
7x wheels
2x swingarms
11x clipons
7x levers
6x rearsets
8x engine side casings
etc etc etc.........

You expecting to crash a few times?

C00kiemonster wrote: You expecting to crash a few times?

Unfortunately some/most of them already "bear the scars" of a careless & incompetent, yet haplessly enthusiastic owner mate.!

Monty wrote:https://flic.kr/p/nwM9Tr

This is what I've got left

Fark!!!! How long have you been hanging onto that lot for Monty? Where were you when I stacked mine! Could've saved me a lot of hours of plastic welding, filling and sanding!!!

Whatever you do Tim, if you need a tail unit, get that one of Monty's, I bought a fibreglass one from http://www.airtech-streamlining.com and after they cost me three times its worth by sending it commercial freight which made me liable for all sorts of import fees I'd never had to deal with before, it turned out to be an unfinished ill-fitting pain in the arse! After trimming to fit, filling all the defects, I still have to fibreglass in standoffs so I can fit the rear seat lock assy. It's the last thing I need to do and then I can finally send my fairings all to the painters.

hi thanks for the reply's.
i am in the uk-west Yorkshire.
i take it you just put those on ebay monty?
do you have a nose,id be happy to follow on ebay or if you wish to withdraw them let me know what you want for them.

id still desperately need a nose cone.
or parts of one.
if you want to email me on troylance1@hotmail.com

anyone has more plastics let me know.
thanks.

Monty wrote:

C00kiemonster wrote:You could almost make a full bike set!

Between me and Spudda we could probably do a full bike!

Trackbike ?

tim1709 wrote:hi thanks for the reply's.
i am in the uk-west Yorkshire.
i take it you just put those on ebay monty?
do you have a nose,id be happy to follow on ebay or if you wish to withdraw them let me know what you want for them.

id still desperately need a nose cone.
or parts of one.
if you want to email me on troylance1@hotmail.com

anyone has more plastics let me know.
thanks.

The noses are by far the rarest panel IMO. They usually break easily in a crash especially around the lights where they are too thin.

If you already have a nose but it's broken, might be worth considering getting it repaired. A decent nose will cost you £200 plus. A new one from triumph is £500 last time I looked....

StMarks wrote:LOL I don't need to feel so bad about my hoard of 675 parts then.?

9x side panels
5x tailpods
4x Front Nose Fairings
7x wheels
2x swingarms
11x clipons
7x levers
6x rearsets
8x engine side casings
etc etc etc.........

You have issues! I thought Spudda was bad!

Spudda wrote:

Monty wrote:

C00kiemonster wrote:You could almost make a full bike set!

Between me and Spudda we could probably do a full bike!

Trackbike ?

LOL not a bad idea.

Looks like I'm the only one selling Daytona fairings on eBay at the moment and they used to be very common.

Be interested to find out how many are left on the road. Who was it that posted to that web site that listed the numbers by model currently taxed? Had a quick google but can't find it.

http://www.howmanyleft.co.uk/" onclick="window.open(this.href);return false;

I have the production figures and exported figures somewhere

I have an unused set of race fairings - cant remember the brand, white fiberglass

Also yellow tank (no pump) and red tail fairing

Welcome to the forum da monkey, where abouts are you based.?