NEW Bike day-ish, GS Round 2
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
A little update,
The first service has been done and they looked in to the bikes gremlins (SOS system and oil level faults) and found that there were several communication errors logged so did a full software update which can take up to 4 hours usually but sometimes needs the bike to stay overnight so they arranged for me to take the 1300GS demo home if necessary... It updated whilst the service was carried out and has been faultless since.
So what have I been doing other than riding it when I get a chance?
Tinkering and ordering farkles
So far I have a pair of horns from a 5 series to go on as the standard roadrunner horn is pathetic.
I have fitted the Yoshi end can which has made it sound much more like it.
And I have scooped up a bargain set of Denali D4 spotlights and a used HEX EZcan to power them*.
The extension leads for those are £not cheap and the EZCan will power the 2nd horn too...
I priced up appropriate extensions and splitters and was looking at the thick end of £100, which is when my inner Yorkshireman woke up and tracked down which electrical connectors they use, ordered a bag of those from Japan and a coil of marine grade 3 core wire rated at 21A. WAY over specified but cheaper to get the stuff to make 10 extension's or splitter's (Y leads) than to order 3 ready made. I also found the specific connectors BMW use for the horns and got some of those as the wiring will need extending and I don't want to cut the factory wiring loom.
I just need a nice day to take half the bike apart to run the cables nice and neatly.
*Using the can controller lets me adjust the brightness or even turn them off on the fly but still have them come on full power with the high beam automatically and if I select the option they will strobe with the horn, very fancy.
The first service has been done and they looked in to the bikes gremlins (SOS system and oil level faults) and found that there were several communication errors logged so did a full software update which can take up to 4 hours usually but sometimes needs the bike to stay overnight so they arranged for me to take the 1300GS demo home if necessary... It updated whilst the service was carried out and has been faultless since.
So what have I been doing other than riding it when I get a chance?
Tinkering and ordering farkles
So far I have a pair of horns from a 5 series to go on as the standard roadrunner horn is pathetic.
I have fitted the Yoshi end can which has made it sound much more like it.
And I have scooped up a bargain set of Denali D4 spotlights and a used HEX EZcan to power them*.
The extension leads for those are £not cheap and the EZCan will power the 2nd horn too...
I priced up appropriate extensions and splitters and was looking at the thick end of £100, which is when my inner Yorkshireman woke up and tracked down which electrical connectors they use, ordered a bag of those from Japan and a coil of marine grade 3 core wire rated at 21A. WAY over specified but cheaper to get the stuff to make 10 extension's or splitter's (Y leads) than to order 3 ready made. I also found the specific connectors BMW use for the horns and got some of those as the wiring will need extending and I don't want to cut the factory wiring loom.
I just need a nice day to take half the bike apart to run the cables nice and neatly.
*Using the can controller lets me adjust the brightness or even turn them off on the fly but still have them come on full power with the high beam automatically and if I select the option they will strobe with the horn, very fancy.
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
Gave it a wash and realised just how much of a pain these things can be to get properly clean, but before I washed it I saw a thing, a bad thing...
A cut in the rear tyre, so I found a non damaging thin thing to see how deep this goes. A cut off zip tie worked well.
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426261742_10161524995088436_7442457045479164263_n.jpg?stp=cp6_dst-jpg&_nc_cat=110&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=_4l6bf0u9WQAX8zKquw&_nc_oc=AQmOvhi4TnDvWEgUtM3hzRw4IAWicCA9YiwztVhvv2Xb31j40dLw0ueqshXgPduL1HI&_nc_ht=scontent-man2-1.xx&oh=00_AfBH8hrCFuR9kxVXjwsT2QtKx_YjzO0wGOQJgABgpMnhTw&oe=65C5BDB6)
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426186774_10161524995118436_1190908213653121468_n.jpg?stp=cp6_dst-jpg&_nc_cat=100&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=X6Q8MmufQdEAX-nnWGK&_nc_ht=scontent-man2-1.xx&oh=00_AfDhSVu7QMl4e4-YEBsSQojwXtzDsnudOBfxvi54f1--Og&oe=65C51154)
Yeah that's deeper than the tread, I can feel the cords at the bottom of that so it's an MOT fail both from length of cut and the fact it's all the way to those cords... New tyre time, probably another A41 to get some use out of the front one... Or maybe a pair of Dunlop Mutants?
Bike scrubs up well though
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426140619_10161524995053436_787517791594523950_n.jpg?stp=cp6_dst-jpg&_nc_cat=110&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=n6dM-7kyMJEAX-nkr61&_nc_ht=scontent-man2-1.xx&oh=00_AfCe_VjEVMV2rNyEUuB4yUNGrUbCrSXNcfUn7ZBQ-1ualA&oe=65C6C54B)
Oh and the cage got a once over too, nice colour that Flamenco Red
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426168135_10161524994948436_7397397552259983715_n.jpg?stp=cp6_dst-jpg&_nc_cat=108&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=fe3tuAkwdh8AX9L0Sx7&_nc_ht=scontent-man2-1.xx&oh=00_AfDMD9JJc4f6LboE0LouzdLCNWfrhgdixWJ4a8LOEfEj2g&oe=65C5BB1D)
A cut in the rear tyre, so I found a non damaging thin thing to see how deep this goes. A cut off zip tie worked well.
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426261742_10161524995088436_7442457045479164263_n.jpg?stp=cp6_dst-jpg&_nc_cat=110&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=_4l6bf0u9WQAX8zKquw&_nc_oc=AQmOvhi4TnDvWEgUtM3hzRw4IAWicCA9YiwztVhvv2Xb31j40dLw0ueqshXgPduL1HI&_nc_ht=scontent-man2-1.xx&oh=00_AfBH8hrCFuR9kxVXjwsT2QtKx_YjzO0wGOQJgABgpMnhTw&oe=65C5BDB6)
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426186774_10161524995118436_1190908213653121468_n.jpg?stp=cp6_dst-jpg&_nc_cat=100&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=X6Q8MmufQdEAX-nnWGK&_nc_ht=scontent-man2-1.xx&oh=00_AfDhSVu7QMl4e4-YEBsSQojwXtzDsnudOBfxvi54f1--Og&oe=65C51154)
Yeah that's deeper than the tread, I can feel the cords at the bottom of that so it's an MOT fail both from length of cut and the fact it's all the way to those cords... New tyre time, probably another A41 to get some use out of the front one... Or maybe a pair of Dunlop Mutants?
Bike scrubs up well though
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426140619_10161524995053436_787517791594523950_n.jpg?stp=cp6_dst-jpg&_nc_cat=110&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=n6dM-7kyMJEAX-nkr61&_nc_ht=scontent-man2-1.xx&oh=00_AfCe_VjEVMV2rNyEUuB4yUNGrUbCrSXNcfUn7ZBQ-1ualA&oe=65C6C54B)
Oh and the cage got a once over too, nice colour that Flamenco Red
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/426168135_10161524994948436_7397397552259983715_n.jpg?stp=cp6_dst-jpg&_nc_cat=108&ccb=1-7&_nc_sid=dd5e9f&_nc_ohc=fe3tuAkwdh8AX9L0Sx7&_nc_ht=scontent-man2-1.xx&oh=00_AfDMD9JJc4f6LboE0LouzdLCNWfrhgdixWJ4a8LOEfEj2g&oe=65C5BB1D)
Last edited by Stonesie on 08 Feb 2024, 16:15, edited 1 time in total.
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
Bike tyres Leeds is starting a promotion on the Dunlop roadsmart 4 on Monday, buy the rear and the front is free....
Very tempting at under £200 for a pair of tyres fitted to loose wheels.
Very tempting at under £200 for a pair of tyres fitted to loose wheels.
- Kwacky
- Posts: 38606
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4325 times
- Been thanked: 8367 times
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
From reviews I've found, they won the German Motorrad test, Chris Moss loves them and a couple of youtubers say they have way less slides in wet and greasy conditions than Road 6's and last longer... (Ridercamtv)
Different tyre but my Italian friend has Dunlop Mutants on his S1000XR and loves them, when we went to Italy to see his family he rode 2-up with full luggage without any problems, when we got there he went out solo on the roads he grew up on riding like a teenager, still loving the tyres.
My last Dunlop's were Qualifier 2 on the Daytona 650 and they were okay unless it was damp, modern Dunlop's are much better.
With that offer I'm getting a pair fitted to loose wheels for £191 so I guess I will let you know
![Yes (y)](./images/smilies/emoticon-0148-yes.gif)
https://www.tyrepress.com/2022/03/newco ... tyre-test/
Mossy
https://youtu.be/xg10TJ_-wwc?si=csuUK6nwb1tT_bpd
7000 mile review
https://youtu.be/RIqI57n5FIo?si=FYfnCWo5dfZyk6yZ
Different tyre but my Italian friend has Dunlop Mutants on his S1000XR and loves them, when we went to Italy to see his family he rode 2-up with full luggage without any problems, when we got there he went out solo on the roads he grew up on riding like a teenager, still loving the tyres.
My last Dunlop's were Qualifier 2 on the Daytona 650 and they were okay unless it was damp, modern Dunlop's are much better.
With that offer I'm getting a pair fitted to loose wheels for £191 so I guess I will let you know
![Cool 8)](./images/smilies/emoticon-0103-cool.gif)
![Yes (y)](./images/smilies/emoticon-0148-yes.gif)
https://www.tyrepress.com/2022/03/newco ... tyre-test/
Mossy
https://youtu.be/xg10TJ_-wwc?si=csuUK6nwb1tT_bpd
7000 mile review
https://youtu.be/RIqI57n5FIo?si=FYfnCWo5dfZyk6yZ
Last edited by Stonesie on 08 Feb 2024, 21:18, edited 1 time in total.
- Kwacky
- Posts: 38606
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4325 times
- Been thanked: 8367 times
- Monty
- Posts: 6709
- Joined: 12 Mar 2014, 07:59
- Your Bike: KTM 690 SMC R
- Location: Peak District
- Has thanked: 2117 times
- Been thanked: 2441 times
Re: NEW Bike day-ish, GS Round 2
I remember loving the Qualifier 2s, but that was nearly 20 years ago! F@ck we got old!
Monty™© MCMLXXII
- D6Nutz
- Posts: 7439
- Joined: 21 Oct 2013, 21:26
- Your Bike: Speed Triple 1200 RS
- Has thanked: 828 times
- Been thanked: 2612 times
- Contact:
Re: NEW Bike day-ish, GS Round 2
I think I had those on the D600. Great tyre, super sticky, 1200 miles out of a rearMonty wrote:I remember loving the Qualifier 2s, but that was nearly 20 years ago! F@ck we got old!
![Image](http://emoji.tapatalk-cdn.com/emoji33.png)
![Image](http://emoji.tapatalk-cdn.com/emoji49.png)
![Image](http://emoji.tapatalk-cdn.com/emoji16.png)
Sent from my Pixel 6 Pro using Tapatalk
You never really learn to swear until you learn to drive.
If everything seems under control, you're not going fast enough - Mario Andretti
If everything seems under control, you're not going fast enough - Mario Andretti
- duke63
- Posts: 15500
- Joined: 22 Oct 2013, 07:34
- Your Bike: Ducati 748/853 & Triumph Street Triple 765RS
- Location: Staffordshire
- Has thanked: 4177 times
- Been thanked: 4132 times
Re: NEW Bike day-ish, GS Round 2
The Roadsmart offer is hard to ignore but I will just say I fitted some Dunlop Mutants to the Multi over Xmas. Second time out today and have to say they are a brilliant tyre. Handle like a sports tyre but grip like a wet tyre even in winter.
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
Yesterday I spent a few hours taking the bike apart like lego, the tank and rear racking came off too, it was not long before slow and steady fighting threadlock gave way to the electric impact gun.
![Image](https://i.imgur.com/kilITAF.jpg)
All to fit a couple of wires so I can run a better horn, bought on eBay from an E60 5 series so it now has the low tone running on the standard wiring and the high running from a HEX EZ can, a magic box which talks to the bikes canbus system so it doesn't throw a fit when an extra horn is fitted or some extra lighting... Like a pare of Denali D4's which I scooped up cheap on eBay.
I thought that I was going to have to extend the wiring to the snail horn which replaced the factory disc horn, thankfully I didn't because the ones I bought are slightly different so will not work..
![Image](https://i.imgur.com/0WfqMcT.jpg)
![Image](https://i.imgur.com/iANAqc8.jpg)
I did clean it up a bit better after checking that it would A) fit and B) work.
Bikes doing a hoverbike impersonation right now between it's centre stand and a pair of 2 ton axle stands under the forks, the wheels are in the car ready for a trip to Bike Tyres LEEDS tomorrow for the Dunlop's, all back together and working other than that, although I did watch the wrong installation video and plugged the EZcan into the wrong sensor, it didn't do any harm, just wasn't getting the right signal/code from the bike so did nothing... Swapped the plug and the Denali's came on but it was a bit late to test the horns.
It will also provide fridge power for my tours this year without wiring direct to the battery like last time![Yes (y)](./images/smilies/emoticon-0148-yes.gif)
![Image](https://i.imgur.com/kilITAF.jpg)
All to fit a couple of wires so I can run a better horn, bought on eBay from an E60 5 series so it now has the low tone running on the standard wiring and the high running from a HEX EZ can, a magic box which talks to the bikes canbus system so it doesn't throw a fit when an extra horn is fitted or some extra lighting... Like a pare of Denali D4's which I scooped up cheap on eBay.
![Cool 8)](./images/smilies/emoticon-0103-cool.gif)
I thought that I was going to have to extend the wiring to the snail horn which replaced the factory disc horn, thankfully I didn't because the ones I bought are slightly different so will not work..
![Image](https://i.imgur.com/0WfqMcT.jpg)
![Image](https://i.imgur.com/iANAqc8.jpg)
I did clean it up a bit better after checking that it would A) fit and B) work.
Bikes doing a hoverbike impersonation right now between it's centre stand and a pair of 2 ton axle stands under the forks, the wheels are in the car ready for a trip to Bike Tyres LEEDS tomorrow for the Dunlop's, all back together and working other than that, although I did watch the wrong installation video and plugged the EZcan into the wrong sensor, it didn't do any harm, just wasn't getting the right signal/code from the bike so did nothing... Swapped the plug and the Denali's came on but it was a bit late to test the horns.
It will also provide fridge power for my tours this year without wiring direct to the battery like last time
![Yes (y)](./images/smilies/emoticon-0148-yes.gif)
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
Okay, first ride on the Dunlop's got off to a great start, I arrived at the cafe to meet Gaz with this on the dash..
![Image](https://i.imgur.com/75kjeVn.jpg)
And 200 miles later on dirty and dusty roads once they dried out a bit...
![Image](https://i.imgur.com/zTnUSeI.jpg)
So what are they like?
Great
The bike feels more sure footed than on the 80/20 Bridgestone's and maybe slightly more nimble, yet strangely more stable.
The Bridgestone's were prone to the odd little slip on damp patches but the Dunlop's encouraged confidence with no slips at all, I had to remind myself "New rubber on wet roads, be careful"
Gaz has a GSA too and had a couple of rear end slips following me on his Road 6 tyres, he's seriously considering a set of these Dunlop's while they are on offer.
I need to get more longer rides in to get bike fit again and also need to grow eyes in the back of my head, there were a lot of people on the first ride of the year today, some riding like absolute bell ends, like the guy who nearly wheelied his SuperDuke into an oncoming car near Helmsley![Gah (gah)](./images/smilies/gah.gif)
![Image](https://i.imgur.com/75kjeVn.jpg)
And 200 miles later on dirty and dusty roads once they dried out a bit...
![Image](https://i.imgur.com/zTnUSeI.jpg)
So what are they like?
Great
The bike feels more sure footed than on the 80/20 Bridgestone's and maybe slightly more nimble, yet strangely more stable.
The Bridgestone's were prone to the odd little slip on damp patches but the Dunlop's encouraged confidence with no slips at all, I had to remind myself "New rubber on wet roads, be careful"
Gaz has a GSA too and had a couple of rear end slips following me on his Road 6 tyres, he's seriously considering a set of these Dunlop's while they are on offer.
I need to get more longer rides in to get bike fit again and also need to grow eyes in the back of my head, there were a lot of people on the first ride of the year today, some riding like absolute bell ends, like the guy who nearly wheelied his SuperDuke into an oncoming car near Helmsley
![Gah (gah)](./images/smilies/gah.gif)
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
Not much to report, I took the bike up to Alston today and found some really tight and twisty roads up near there. The tyres are fantastic and I'm slowly getting used to the handling of this big bike. 274 miles and all on 1 tank is nice,
Also fun being on comms with my friends and hearing them swearing and grumbling about the roads whilst the GS is ironing out all but the nastiest bumps and even jumping some crests with ease, landing more softly than such a heavy machine has any right to.
I have used most of the rubber
![Image](https://i.imgur.com/ei1bG5t.jpg)
A quick pitstop in Reeth
![Image](https://i.imgur.com/2Ka1A6J.jpg)
Also fun being on comms with my friends and hearing them swearing and grumbling about the roads whilst the GS is ironing out all but the nastiest bumps and even jumping some crests with ease, landing more softly than such a heavy machine has any right to.
I have used most of the rubber
![Image](https://i.imgur.com/ei1bG5t.jpg)
A quick pitstop in Reeth
![Image](https://i.imgur.com/2Ka1A6J.jpg)
- Stonesie
- Posts: 2363
- Joined: 11 Jun 2014, 21:43
- Your Bike: BMW R1250GSA
- Has thanked: 1388 times
- Been thanked: 1465 times
Re: NEW Bike day-ish, GS Round 2
A friend sent me a link, I had spotted the roadside photographer but couldn't remember the name on his advertising board...
Hartside pass
https://www.bikerphoto.co.uk/p400440737/he9dbffde
Edit
I bought it
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/434486806_10161615744918436_4833248615339645418_n.jpg?_nc_cat=104&ccb=1-7&_nc_sid=5f2048&_nc_ohc=5X9Ol1C1IEsAX_u_gn9&_nc_ht=scontent-man2-1.xx&oh=00_AfBFs3E8nWtc84X0hFP8ts3HC5JU_dt_hlcZfsUtAqJLHA&oe=660CB05C)
I will lean more when there's less salt on the roads, you can see it to my right...
Saying that, looking through some other pics in their gallery I was leaning more than most, and GS's are too common![rolf (rolf)](./images/smilies/rofl.gif)
Hartside pass
https://www.bikerphoto.co.uk/p400440737/he9dbffde
Edit
I bought it
![Image](https://scontent-man2-1.xx.fbcdn.net/v/t39.30808-6/434486806_10161615744918436_4833248615339645418_n.jpg?_nc_cat=104&ccb=1-7&_nc_sid=5f2048&_nc_ohc=5X9Ol1C1IEsAX_u_gn9&_nc_ht=scontent-man2-1.xx&oh=00_AfBFs3E8nWtc84X0hFP8ts3HC5JU_dt_hlcZfsUtAqJLHA&oe=660CB05C)
I will lean more when there's less salt on the roads, you can see it to my right...
Saying that, looking through some other pics in their gallery I was leaning more than most, and GS's are too common
![rolf (rolf)](./images/smilies/rofl.gif)